many people had problems with unlocking idea netsetter huawei e1732. so here is a new method introduced by nill and it works 100%. first of all you must have patience doing this. because the process it bit long. and also you have to download some softwares.
Steps to unlocking !dea netsetter E1732 permanetly...
download the softwares from the below link..
1) idea E1732 updator
2) idea E1732 unlocking tool
3) new mobile partner dashboard
Note : you must disable antivirus before starting unlocking
- Now connect your e1732 idea net setter to pc( sim is not insert while unlocking)
- find the common port to which your huawei e1732 modem is connected. you can do this by.
Right click on your "My Computer" icon > Properties > Hardware > Device Manager > Ports (COM & LPT) > HUAWEI Mobile Connect -- 3G Application Interface
remember the com port number into which your huawei e1732 idea netsetter modem is connected
- Run “CDMA Workshop v2.7.0.exe”
- Select the Port that you noted from your Device Manager under the Port option in
- then click on "connect" and then click on "read"
- Go to the “Security” tab > Type “000000” in the blank box under “SPC” > Click on “SPC” button > Click on “Send” with Default (nv_read) as SPC.
- Click on “Memory” tab > NV Items > Read > Now a “Conform” box will appear > Click “OK” > Now a “NV Items Backup” box will appear > In the box straight to “Last NV Item” type “9999” > Click “OK” > Save the file by giving a file name you like (Eg: E1732)
- When the buffer reach “100%” your file is saved successfully > Now a “Information” box will appear > Click “OK” >
- Minimise “CDMA Workshop v2.7.0
- Run "E1732 updator” > accept the agreement > Next > Wait for a few seconds until the search for your modem finishes > (Don’t mark on “Auto remove the device after update”) Next > (Don’t remove your data card until the process is finished) > Start > At the end of “Downloading Programs…” you will get a “Update Failure!” error dialog box (DON’T WORRY & DON’T GET DISAPPOINTED) > Click “OK” > Click “Finish
- Maxzimize “CDMA Workshop v2.7.0” > “Main” tab > Disconnect
- Unplug your Idea Netsetter (Modem) from your computer.
- Again Plug it to the Computer - Check the "Port" again from the "Device Manager"
- Go to "CDMA Workshop v2.7.0" select the Port that you noted from your Device Manager under the Port option in "COM Settings (AT mode)" under the "Main" tab as we did before - Click on "Connect" - "Memory" tab - NV Items - Click on "Write" - A "Confirm" box will appear - Click "OK" - "Open" dialog box will appear - Open the file that you saved before - When the buffer reach "100%" a "Information" dialog box appears with a success message - Click "OK" - "Main" tab - Disconnect.
- Now close "CDMA Workshop v2.7.0" - A "Confirm" dialogue box will appear - Click "NO"
- Close everything - Enable your Antivirus
Your Idea Netsetter E1732 is unlocked successfully.
Unplug Idea Netsetter (Modem) from your computer.
Again Plug it to the Computer.
Wait for Idea Netsetter to Start
Put a SIM Card other than IDEA to the Netsetter / ModemIf it again shows "The SIM/USIM card not been detected or is invalid" (DON'T GET DISAPPOINTED) - Click "OK" - Wait for the SIM card to be detected - It will detect the SIM card and enjoy browsing with any other SIM.
Thanks my friend : skillweb.blogspot.com
.jpg)
